ROAD REBEL
Faster than ever before. The Road REBEL features an optimal combination of aerodynamics and weight, making this the perfect racing bike for all conceivable conditions. Thanks to the aerodynamic frame, many wattages are saved, despite this being at the expense of the minimal speed loss uphill. The combination of the aerodynamic frame, the integrated cockpit and the SRAM equipment ensure that your cycling friends should fear the speed of the Road REBEL.
FINAL ASSEMBLY
The bike comes standard with SRAM or Shimano spec, where you can choose between the electronic groupsets SRAM RED eTap or Shimano Dura Ace Di2. Fully customizable, just like the length of the crank, cassette ratio and crank ratio. Are you not yet sure about the mechanical groupsets and would you rather choose for the final assembly of a mechanical groupset? Please do not hesitate to contact us to discuss the possibilities.
WHEELS
With a choice of 30mm, 40mm or 50mm carbon wheels from REBEL, your aerodynamic road bike gets a huge speed boost. The carbon wheelset gives you a huge speed advantage, which means that no segment on Strava is safe anymore. Do you prefer a wheelset from DT Swiss? Please do not hesitate to contact us to discuss the possibilities.
COCKPIT
And finally to complete the aerodynamic Road REBEL. Something that should no longer be missing from today's aero bikes, an aerodynamic cockpit. With the stem and handlebars made of aerodynamically formed carbon, the cockpit, like the rest of the Road REBEL, is all about speed. All cables run through the handlebar, which gives the handlebar a super sleek look! Do you prefer an aluminum handlebar? Please do not hesitate to contact us to discuss the possibilities.
COMFORT & STIFNESS
Comfort and stiffness are in the cycling world opposing factors, but during the development of the road REBEL these factors played a big role. The goal was to manufacture a bike that has the best of both worlds. The bike is made of the highest grade carbon fiber, that means that the bike is super stiff and the loss of power is minimized to the bare minimum. During the development phase of the road REBEL we looked at a way to counter the stiffness. We did this by adding a wider fork and backbridge. Thanks to these changes it is possible to ride with tires that are 28mm wide. This improves the ride comfort, without the loss of aerodynamics.
Alle onderdelen weergeven
| FRAMESIZE |
| A - REACH |
381 mm |
395 mm |
402 mm |
409 mm |
| B - STACK |
520 mm |
540 mm |
551 mm |
561 mm |
| C - WHEELBASE |
983 mm |
1003 mm |
1009 mm |
1018 mm |
| D - CHAINSTAY LENGTH |
408 mm |
408 mm |
408 mm |
408 mm |
| E - FRONT CENTER |
584 mm |
605 mm |
610 mm |
620 mm |
| F - BOTTOM BACKET DROP |
68 mm |
68 mm |
68 mm |
68 mm |
| G - BOTTOM BRACKET HEIGHT |
|
|
|
|
| H - SEAT TUBE ANGLE |
74° |
74° |
73,5° |
73° |
| I - SEAT TUBE LENGTH |
510 mm |
530 mm |
550 mm |
570 mm |
| J - SEATPOST INSERT LENGTH |
200 mm |
220 mm |
240 mm |
260 mm |
| K - HEAD TUBE ANGLE |
72 ° |
72° |
72,5° |
72,5° |
| L - HEAD TUBE LENGTH |
109 mm |
130 mm |
140 mm |
150 mm |
| M - FORK LENGTH |
380 mm |
380 mm |
380 mm |
380 mm |
| N - FORK RAKE |
50 mm |
50 mm |
50 mm |
50 mm |
| O - TRAIL |
|
|
|
|
| P - STANDOVER HEIGHT |
|
|
|
|
| Q - TOP TUBE LENGTH |
530 mm |
550 mm |
565 mm |
580 mm |
Products specifications
At REBEL you have the opportunity to customize your own bike. Everyone has their own goals, so why don’t we create a personal bike? Do you prefer a standard bike? Please get in touch with the customer service to discuss the possibilities around your dreambike.
Specifications for standard bikes
This REBEL is assembled with the parts shown below. Pay attention: parts may deviate from the parts on the picture. Don’t you like the color of the frame? Don’t worry, we like to think along to create your dreambike! At REBEL you have the possibility to design your own frame. Thereafter we’ll take care of painting the bicycle to your personal wishes.
Drivetrain
-
SRAM Red eTAP
-
Shimano Dura Ace Di2
Bottle cage
-
REBEL Carbon Bottle Cage 2x
Wheels
-
REBEL Carbon 50mm
-
REBEL Carbon 30mm
-
REBEL Carbon 40mm
Handlebar
-
REBEL Carbon Aero Cockpit
Saddle
-
Fizik vento argo r1
-
Fizik antares r1
-
Fizik arione R1
-
Fizik aliante r1
-
Fizik tempo argo r1
The REBEL bikes are guarenteed against construction defects in materials or in workmanship. All products that fail by normal use will be replaced or repaired by the same, or the most similair product. The conditions of this warranty are described below.
DURATION OF THE WARRANTY ON FRAMES
Every REBEL has a usable lifetime. This doesn't mean the frame can't break. The warranty covers the construction failures caused by normal use. The warranty for all REBEL bike frames remains valid till five years after the original date of purchase. This warranty will only be valid for the original owner of the REBEL and is not transitable for following owners.
DURATION OF THE WARRANTY ON PAINTJOBS
Frame paint has a warranty of two years from the original date of purchase. This condition applies for standard frames and frames where REBEL has provided the frame with a custom paintjob. Blur of the frame paint caused by the effects of Ultraviolet (UV) lightning will not be covered by the warranty.
Crash replacement frames
High forces on the frame caused by an accident or crash may cause structural damage on the frame. With the crash replacement service damaged frames can be replaced by a reduced rate. REBEL's crash replacement service and remains lifetime available for the first owner and cannot be transferred to subsequent owners. At the crash replacement warranty, the damaged frame will be replaced by a new frame without additional parts.
- The damaged frame must be handed in
- Intentional damage doesn't apply on a crash replacement
- Crash replacement is only available to the first owner of the bike
PARTS WARRANTY
All non-REBEL bike parts will be covered by the warranty of their manufacturer and will not be covered by the warranty of REBEL bikes. This means the warranty conditions of all non-REBEL bike parts are within the warranty conditions of the concerned manufacturer(s).
